Feature:
-Scar removal includes acne scar removal or treatment.
-Acne scar removal, acne scar treatment.
-Anti-wrinkle treatment, anti-aging.
-Hair loss treatment or hair restoration.
-Surgical scar removal.
-Hyperpigmentation treatment.
-Treat acne scars and heal wounds.
-Suitable for permanent makeup and microneedle treatment systems
-Permanent eyebrow tattoo, lip tattoo.
Specification:
Product Name: electric seal machine
Model Name: A1-W
Needle Material: stainless steel
Handle Material: alloy
Color: Blue
Target Area: face
Input: AC 100-220V 50 / 60Hz
Adapter: 5V, 1000mA
Pen Size: about 15.7 * 3cm (L * D)
Packing Size: about 17 * 13 * 6cm (length * width * height)
Weight: About 346g
Issues: Acne, age spots/freckles, blemishes, early signs of aging, wrinkles/lines, Permanent eyebrow, lip tattoo
How To Use:
1. Set The Adapter Mode
(1) Insert the DC adapter into the jack.
(2) Plug the DC adapter into an AC power outlet.
2. Preparation
(1) Remove the needle box from the sterilized package.
(2) Insert 2 circular slots of the machine, push the pin cartridge horizontally to the end.
(3) Rotate the ink cartridge to the counter to lock it clockwise.
(4) Needle length should be adjusted after starting up.
(5) If you want to remove the needle box, rotate it clockwise and push it out horizontally, and put the circular slots (slot1.slot2) together.
3. Adjustment Of Speed And Needle Length
(1) Speed ​​and ON / OFF adjustment Turn on the speed ring (face 1 ~ 4, body 5 ~ 6)
(2) 6-level speed control
When you turn on the power first, it starts from lowest to highest. Speed ​​cycles from low to high. When you need to stop the machine, return to the "0" level.
(3) Needle length adjustment
You can adjust the length of the needle by turning the adjustment ring clockwise or counterclockwise. Turn it clockwise to make it longer. Turning it counterclockwise will make it shorter.
How To Operate:
-Use a cleanser to clean the area of ​​the skin to be treated;
-Disinfection of microneedles with 75% alcohol / saline / ultraviolet light;
-Dissolve the lyophilized powder and roll with a needle (need to be used with lyophilized powder or related flavors);
-Cross rolling operation of each part for about 8-15 minutes;
-Face operation: forehead-right face size-left face size;
-It is better to add lyophilized powder or related essences at the same time during rolling;
-Apply a special ice mask after rolling for about 30 minutes (do not rinse with water);
-Do not touch the skin for 6-8 hours to prevent infection;
-Nursing 1-2 times a week, 10 sessions, it is recommended to use more than 2 consecutive sessions for better results.
Package Included:
1x Host
1 XU.S. Adapter
1 XBox
1x English Manual
2 x 12-pin Needles
Detail Pictures: